A progressive approach to predict shot peening process parameters for forming integral panel of Al7050-T7451

In this paper, a progressive approach to predict the multiple shot peening process parameters for complex integral panel is proposed. Firstly, the invariable parameters in the forming process including shot size, mass flow, peening distance and peening angle are determined according to the empirical and machine type. Then, the optimal value of air pressure for the whole shot peening is selected by the experimental data. Finally, the feeding speed for every shot peening path is predicted by regression equation. The integral panel part with thickness from 2 mm to 5 mm and curvature radius from 3200 mm to 16000 mm is taken as a research object, and four experiments are conducted. In order to design specimens for acquiring the forming data, one experiment is conducted to compare the curvature radius of the plate and stringer-structural specimens, which were peened along the middle of the two stringers. The most striking finding of this experiment is that the outer shape error range is below 3.9%, so the plate specimens can be used in predicting feeding speed of the integral panel. The second experiment is performed and results show that when the coverage reaches the limit of 80%, the minimum feeding speed is 50 mm/s. By this feeding speed, the forming curvature radius of the specimens with different thickness from the third experiment is measured and compared with the research object, and the optimal air pressure is 0.15 MPa. Then, the plate specimens with thickness from 2 mm to 5 mm are peened in the fourth experiment, and the measured curvature radius data are used to calculate the feeding speed of different shot peening path by regressive analysis method. The algorithm is validated by forming a test part and the average deviation is 0.496 mm. It is shown that the approach can realize the forming of the integral panel precisely.     

导流锥结构参数对燃气弹射筒内压力冲击平滑效果影响研究

针对导流锥结构参数对内弹道流场耦合影响问题，基于动态分层动网格技术，构建了含导弹运动和二次燃烧的内弹道数值模型，并验证了模型可靠性。解耦分析了导流锥半径、高度及冲击高度对内弹道流场特性和载荷的影响。结果表明：导流锥的结构直接决定燃气飞溅现象的产生和流场结构的紊乱程度，导流锥的半径、高度和冲击高度的改变会对燃气反射点的位置、二次燃烧的区域以及剧烈程度产生影响;结构优化后的导流锥，较大程度地缓解了冲击现象，获得了较好的平滑效果，筒底压力较实验装置降低了24.5%。     

夹杂物特征参数对拉伸载荷下超高强度钢裂纹萌生与扩展的影响

采用扫描电镜原位观测的方法,动态跟踪观察拉伸载荷作用下航空发动机轴类超高强度钢MA250中不同形状和尺寸的TiN夹杂导致裂纹萌生与扩展的微观行为,从微观角度分析拉伸载荷作用下夹杂物的几何长轴与外加载荷方向成不同角度时裂纹的萌生方式.同时讨论TiN夹杂中第一条裂纹萌生所需的应力与夹杂物面积的关系.结果表明,夹杂物面积越大,第一条裂纹萌生所需的应力越小.     

Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

周期结构和太阳电池翼的模态分析

基于周期结构的振动理论,把折叠状态太阳电池翼当作拟周期结构处理,解释了太阳电池翼在进行模态分析时所出现的“主模态局部化”现象,了解该现象对于在实验模态分析中确定阻尼系数具有重要意义。同时从理论上说明了,简单的基板模型的第1阶特征值是整翼模型的第1阶特征值的近似值。两个算例计算的结果支持了这个观点。     

运载火箭模态试验仿真技术研究新进展

针对传统数学模型修改技术无法解决大型工程问题的局限性,为了实施模态试验仿真,提出一套适用于航天器复杂结构模型修改新技术,称之为子结构试验建模综合技术。简要综述在运载火箭模态试验仿真技术方面研究的新进展,并介绍两个应用实例:一是CZ-2E运载火箭全箭模态试验仿真与预示,用介绍的模态试验仿真技术成功地预示运载火箭模态参数,预示的模态与随后进行的实尺运载火箭模态试验所测到的模态非常一致,进而验证介绍的仿真技术的可靠性;另一个是CZ-2F载人运载火箭全箭模态试验仿真,它为箭船耦合动力学分析提供了可靠数学模型与数据。这两个大型工程应用实例说明了运载火箭模态试验仿真技术的工程实用性。     

尺寸参数对气动液阀启动特性的影响

为气动液阀的启动过程建立了数学模型，分析了尺寸参数对该阀启动特性的影响。计算结果表明：在保证必要的工作寿命的前提下，适当地增大控制腔气孔的直径或增大靠近控制腔的活塞端面直径有利于提高该阀的响应能力。本文所得的结论有利于此类阀门的设计。     

自由—自由结构振动模态的一阶导数

空间飞行器和车辆等一大类结构属于自由—自由结构。本文讨论这类结构的振动模态－阶导数计算问题，提出了一种改进的截尾模态展开法，将未知模态对模态导数的贡献用已知模态和系统矩来表达。针对刚度阵奇异问题，提出了移位措施，通过选择的移位系数，不仅解决了奇异问题，而且加速了算法的收敛速度。给出了一个数值例子，算例表明本文方法十分有效。     

动力学缩聚模型修正的矩阵逼近法

为避免结构动力学分析中修正有限元模型时的大型稠密矩阵运算,研究了一种用基于矩阵逼近的有限元缩聚模型修正法。根据有限元模型的缩聚和修正,给出了试验模态的扩阶、物理模态到广义模态的映射和矩阵逼近,并讨论了结构存在重频时模态的相关性。算例表明,该法可行。     

固体火箭发动机试验模态分析技术研究

将固体火箭发动机划分为144个自由度，采用锤击法，单点激励多点响应（SIMO）对其在4种工况下进行了频率响应的测量，应用了多种方法进行模态参数识别和数据拟合，并对其结果进行比较，获得了发动机在各工况1kHz以内的各阶固有频率、振型和阻尼，并对试验模态分析技术在固体火箭发动机试验中的应用进行了研究。